 |
products |
|
|
|
|
|
|
|
 |
|
| Intruder Detection... |
|
We provide a variety of technologies that detect intruders in the outdoor environment at the perimeter limits or around sensitive, high-risk areas. At this very moment, our sensors are helping protect many areas and helping guards to reacts in time.
Our success is based on understanding and overcoming the challenges of making security systems work under varied and sometimes extreme weather conditions, providing the lowest possible number of false and nuisance alarms while maintaining a very high probability of detection, implementing protection in a way that is difficult, if not impossible, to defeat.
The systems that we offer to airport and aviation clients have already been proven time and again in security applications as varied as nuclear facilities, military bases, communications centers, maximum security prisons, estate residences, utilities and commercial facilities.
With an arsenal of many products to combat perimeter intrusions, we are in a unique position to help our clients implement a tailored system for their specific security requirements.
Brief about our sensors for intruder detection, for |
|
| Know More >> |
|
 |
| Perimeter intrusion detection security sensor that generates an invisible electromagnetic radio-frequency detection field around buried sensor cables. The detection field can be up to 3 m wide by more than 1 m high. The system identifies intruders moving through the field based on their mass and movement. It has a very high probability of detection, very low false alarm rate and the lowest vulnerability to defeat of any outdoor sensor - it’s hard to beat what you can’t see! The sensor is completely covert, so does not affect site appearance. It is terrain-following and ignores environmental effects and small animals. Its sensor cables can be used for power distribution, data collection and communication, remote sensor test and calibration, and remote control of auxiliary sensors and devices, such as lights or sirens. It can easily be buried in the tarmac. |
| |
| |
|
|
|
 |
Infrared illuminator
It is a solid-state infrared LED illuminator that creates light that, while invisible to the naked eye, is visible to standard infrared-sensitive CCTV cameras. It’s provides the most uniform coverage and the longest range of infrared LED illumination available today. The light it creates is eye-safe even at very close distances. These illuminators are ideal for Civil Aviation, Defense, Police, Coast Guard applications. |
| |
| |
|
|
|
 |
Fence-mounted Intelligent Sensor
It is a microphonic cable disturbance sensor for outdoor fence-mounted perimeter security applications.
A micro-computer-based signal processor analyses the signals from a proprietary coaxial sensor cable that is installed on a fence. The system identifies attempts to climb, cut or lift the fence fabric.
Advanced signal processing and adaptive algorithms virtually eliminate alarms from natural or environmental effects. The processor is capable of standalone operation or can be part of a multiplexed data network. It can be used on chain link or welded mesh fences. |
| |
| |
|
|
|
|
Fence mounted Fiber Optic Sensor
It is uses the same proven sensor technology, but uses fiber optic cable instead of microphonic cable.
Fiber optic cable is extremely versatile and can be applied to virtually any fence. It is particularly useful where there is a risk of EMI, RFI or lightning in EMI sensitive environments. |
| |
| |
|
|
|
 |
Combined barrier/sensor system
We provide two different taut wire perimeter intrusion detection systems: Yael and DTR combine the deterrent properties of an actual physical barrier (fence) with an advanced, continuous network of sensor wires. Any attempt to displace, lift, climb, pull or cut any of the sensor wires is detected by solid state, piezo-electric, crystal analog transducers in Yael or self-adjusting sensor micro switches in DTR and is communicated to the central control unit. The transducers and switches are mounted inside stainless steel sensor posts that support the tensioned sensor wires. Each system fence is terrain following and is not affected by weather effects or small animals. Yael and DTR are proven sensors, installed worldwide, with extremely low false/nuisance alarm rates. |
| |
| |
|
|
|
 |
Microwave Sensor
It is a microwave intrusion detection sensor is a volumetric, high-performance, cost-effective, easy-to install system that creates a microwave field between transmitter and receiver units to detect intruders based on their size and speed.
It provides optimum volumetric performance for separations between 3m (10 ft.) and 183 m (600 ft.). It operates on the X-Band at 10.525 GHz, with six selectable modulation frequencies and rotatable printed array antenna elements to eliminate interference between overlap and close proximity units. Its receiver incorporates signal processing with a very wide dynamic range, enhanced target signature analysis and minimum susceptibility to radio frequency interference (RFI), electromagnetic interference (EMI) and environmental effects.
|
| |
| |
|
|
|
 |
Video Motion Detection Sensor
It is outdoor video motion detection and tracking system on a PC platform in a Windows environment.
It transforms CCTV cameras into intrusion sensors that provide integrated outdoor detection and assessment. It is suited to both perimeter and wide-area coverage. By using pre-alarm intruder tracking and advanced signal processing, It provides reliable detection and low nuisance alarm rates from environmental effects, small animals, blowing debris, etc.
Selected areas in the field-of-view and selected intrusion directions can be masked. It provides integral alarm annunciation, colored intruder following, CCTV sequential alarm switching, color video map graphics and hard disc storage of all alarm events. It has a direct RS-232 interface to an external VCR or to a digital recording system for post-alarm recording. Independent tests have shown to be among the most reliable outdoor video motion detection sensors with a very low nuisance alarm rate.
|
| |
| |
|
|
|
 |
“Breakthrough” Detection Sensor
It is an intrusion detection sensor for the protection of building interiors. It adapts proven microphonic cable technology to the specialized requirements of indoor security applications. The sensor can protect walls, ceilings, roofs, stock cages, floors and pipes. The sensor cable is mounted to an interior surface and the sensor processor monitors the cable for signals corresponding to shock, impact and sustained attack when an intruder attempts to cut, smash, crush or saw through the exterior surface. It’s provides cost effective protection for warehouses, bank vaults, security cages, ammunition bunkers, secure rooms- Server and a variety of unattended facilities.
|
| |
| |
|
|
|
| More >> |
| |
| |
|
|
